In this blog post, we are going to cover how we install our Wheel Stops.
We have both a Video and a Photo gallery for your viewing enjoyment.
Today, we're installing some of our Heavy Duty Wheel Stops. We stock a wide variety including Concrete, Rubber, Heavy Duty and Premium variants.
Firstly, we have to line out the spots for our Wheel Stops using a fluorescent string to make sure that the line is straight and the distance between the kerb is consistent across the area.
Secondly, we place the wheel stops between the markings and make sure that the distance is centered between the markings and lines up with the kerb and the string marking.
We then repeat the process with the other wheel stops and double check to see if they're all lined up.
Next, we use a drill to break through the rubber to create an opening in the Wheel Stop Fixing Points to install the fixings.
Wheel Stop Fixings
Drilling with a Jackhammer
Finally, we place the Fixings into the Wheel Stop and fasten them using a Jackhammer. This process is repeated until all of the Wheel Stops have been installed.
There you have it, that is how we install our Wheel Stops. If you have any questions, feel free to send through a message to Bruce or contact us on 0734217130 for more information.