Small Rubber Wheel Stop | 500MM

Rubber Wheel Stops Rubber Wheel Stops are an effective, proven method to help vehicles come to a safe and quick stop. Primarily used in car parks, Rubber Wheel Stops fit both a practical need an a requirement from the Australian Standards (AS/NZ 2890.1) Concrete Car parkTKO Bollards Rubber Wheel Stops work well in all car park situations whether the surface is tarmac or concrete - for the car park surface the only thing that matters is the bolt used to secure the rubber wheel stops onto the car park surface, in concrete surfaces you will need to drill the screw bolt into the concrete for a secure fit. Asphalt Car parkFor asphalt surfaces it is much the same where you can simply hammer in the spike to secure the wheel stop to the asphalt surface.Our Rubber Wheel Stops are manufactured from high quality rubber and comes with reflective "hi-vis" yellow hazard markings. Rubber Wheel Stops specifically are easy to install and can be installed by a single person, opposed to concrete wheel stops that by Australian Standards require two people to install. Lastly, rubber wheel stops help drivers reverse and drive nose-in with more confidence. Rubber Wheel Stops dimensions: 1650x140x100 Weight: 13.5 KGSAustralian Standard 2890.1:2004 Click here to buy fixings (make sure to know what surface your car park is)   Specs & Sizing Weight 13.5KG Dimensions 1650x140x100   TKO Rubber Wheel Stops Key Features: Easy to Install Ready for Use Immediately after Installation Low Maintenance Environmentally Friendly. No Lifting OH&S issues as with Concrete Suitable for Indoor & Outdoor Environments Maximum Visibility All Prices Exclude GST - Shipping may vary depending on your location. Perfect for Car Parking Stops Order Your Rubber Wheel Stops Today    Remember, when installing your wheel stops (or us, since we offer installation) you need to buy the appropriate fixings...

Heavy Duty Wheel Stops & Parking Stop TKO Bollards Heavy Duty Wheel Stops are our high quality, sustainable, recycled rubber model that comes with 3 years free warranty. It comes with high reflective yellow chevron hazard markings for superior visibility and they are easily installed in minutes.  The dimensions of the Pro Stop Rubber Wheel Stops are 1650mm x 160mm x 100mm  Our Recycled Wheel Stop meets Australian Standard 2890.1:2004 FIXINGS SOLD SEPARATELY  Specs & Sizing Weight 13KG Dimensions 1650x160x100         TKO Bollards Pro Stop Rubber Wheel Stops Key Features: Wheel Stop manufactured from 100% recycled rubber Superior construction & durability means these wheel stops will not warp, crack, chip or rot Lightweight, easy to handle and can be installed by one person Yellow reflectors for increased visibility on both ends, plus two chevrons on either side Built-in stormwater channels to prevent water pooling on outdoor surfaces Three Fixing Points Approximately 1/5 the weight of concrete, greatly reducing transport and handling costs Resistant to UV, moisture, oil and extreme weather conditions Flexible, allowing for conformity to contour on virtually any road surface Pro Stop Wheel Stops comply with Australian/NZ current standard AS/NZS 2890.1:200 Three-year warranty on all Heavy Duty Wheel Stops No Lifting OH&S issues as with Concrete Suitable for Indoor & Outdoor Environments Maximum Visibility All Prices Exclude GST - Shipping may vary depending on your location. Perfect for Car Parking Stops Order Your Wheel Stops Today  Remember, when installing your wheel stops (or us, since we offer installation) you need to buy the appropriate fixings for the surface, concrete (slab) or asphalt (bitumen) Click here to view our fixings page The TKO Wheel Stops require fixings upon installation. Kindly let us if your wheel stop will be on concrete or bitumen - These fixings are $15 (excl GST) per Wheel Stop. Please call us on 1300...

Premium Rubber Wheel Stops & Parking Stop TKO Bollards Premium Rubber Wheel Stops are our premium heavy duty model that has a longer length (2000mm) than our Tuff Stops and have one extra fixing points. The Wheel Stops are made out of high quality sustainable recycled rubber model that comes with 3 years free warranty and are UV, moisture, oil resistant, and can handle extreme temperature variations. It comes with high reflective yellow hazard markings for superior visibility and they are easily installed in minutes.    The dimensions of the Premium Rubber Wheel Stops are 2000 mm x 160 mm x 100mm  Our Recycled Wheel Stops meets Australian Standard 2890.1:2004 FIXINGS SOLD SEPARATELY  Specs & Sizing Weight: 21KG Dimensions:        2000x160x100   TKO Bollards Premium Rubber Wheel Stops Key Features: Wheel Stop manufactured from 100% recycled tyre crumb rubber Superior construction & durability means these wheel stops will not warp, crack, chip or rot Lightweight, easy to handle and can be installed by one person Yellow reflectors for increased visibility on both ends, plus two chevrons on either side Built-in stormwater channels to prevent water pooling on outdoor surfaces Approximately 1/5 the weight of concrete, greatly reducing transport and handling costs Resistant to UV, moisture, oil and extreme weather conditions Flexible, allowing for conformity to contour on virtually any road surface Premium Wheel Stops comply with Australian/NZ current standard AS/NZS 2890.1:200 Three-year warranty on all Premium Wheel Stops No Lifting OH&S issues as with Concrete Suitable for Indoor & Outdoor Environments Maximum Visibility All Prices Exclude GST - Shipping may vary depending on your location. Perfect for Car Parking Stops Made from USED Recycled Tyres Order Your Rubber Wheel Stops Today  Remember, when installing your wheel stops (or us, since we offer installation) you need to buy the appropriate fixings for the surface, concrete (slab) or asphalt (bitumen) Click here...

Concrete Wheel Stops are both strong, durable and can prevent damage to property or people from vehicles. Manufactured in Brisbane, these concrete wheel stops are made from a combination of premium concrete and steel reo bar to help improve reliability. TKO Bollards Concrete Wheel Stops can be easily painted to any colour you require just ask us upon ordering. Please call us on 1300 258 456 Buy Today - Shipped Today. Remember, when installing your wheel stops (or us, since we offer installation) you need to buy the appropriate fixings for the surface, concrete (slab) or asphalt (bitumen) Need fixings? Click here to view our fixings page Specs & SizingWeight: 55kgLength:1650mmWidth:170mmHeight:100mm Further information on these concrete wheel stops All Prices Exclude GST - Shipping may vary depending on your location. Apply to Australian Standards AS2890.1 (2004) Manufactured from 40 mpa concrete and our concrete wheel stops contain 2 x N12 Australian steel reo bars.

Wheelstop Fixings for installation into Asphalt x3 (Bitumen, tarmac etc). These fixings can be used for both the rubber wheel stops and concrete wheel stops as long as you are installing into asphalt, bitumen, tarmac etc. Wheel Stop Fixing dimensions:300mm Length (spike) Our bitumen & asphalt wheel stop fixing kits    Fixings for asphalt/bitumen. This will cover for both concrete and rubber wheel stops - one purchase of a fixing kit covers one wheel stop Also known as Wheel Stop Nails or Wheel Stop Spikes. Compatible Products: Concrete Wheel Stop Rubber Wheel Stop Heavy Duty Wheel Stop   Please only purchase this for your concrete/rubber wheel stops that are being installed into asphalt/bitumen. All Prices Exclude GST - Shipping may vary depending on your location.   For wheel stops installed onto concrete CLICK HERE

Wheelstop Fixings for installation into Concrete. These fixings can be used for both the rubber wheel stops and concrete wheel stops. Wheel Stop Fixing dimensions:m12 screw bolt150mm Length Our concrete wheel stop fixings are made with quality steel and are what we use ourselves when doing installation jobs, the added benefit to these concrete wheel stop fixings is the length, some cheaper fixing kits are barely long enough to hold the wheel stop in place - our fixing kits are more than long enough to give the fixing itself the required amount of strength needed. Also known as Wheel Stop Nails or Wheel Stop Spikes. One purchase of a fixing kit covers one wheel stop (3 FIXINGS) This fixing kit will work with: Concrete Wheel Stop Rubber Wheel Stop Heavy Duty Wheel Stop   All Prices Exclude GST - Shipping may vary depending on your location. For wheel stops installed onto asphalt CLICK HERE